| Shear Pin Load Cell |
| Friday, 01 July 2005 |
This range of Shear Measuring Pins are designed to match standard rigging fittings. They are machined from high tensile stainless steel and are supplied complete with an anti-rotation weld washer and spacing washers. Each pin is supplied with a suitable length of 4-core screened cable which as standard, will exit from the pin at 90° to the direction of load. The whole unit is sealed to IP67.
| TYPE REF | D mm | L mm | ROD SIZE | SWL RATING Kg | | SMP-500 | 12.7mm | 23 | -10 | 1815 | | SMP-625 | 16mm | 29 | -17 | 4090 | | SMP-750 | 19mm | 32 | -22 | 6135 | | SMP-875 | 22mm | 43 | -30 | 8182 | | SMP-1000 | 25mm | 44 | -40 | 12273 | | SM P- 1125 | 29mm | 54 | -48 | 14318 |
| Bridge Resistance | 350 Ohms | | Excitation | 5V DC | | Output (Nominal) | 1.5 to 2.0mV/V at Rated Load | | Insulation Resistance | >500 MOhm @ 100 VDC | | Operating Temperature | -20°C to +70°C | | Compensated Temp. Range | -10°C to +50°C | | Zero Temp Coefficient | 0.01 % of Rated Load /°C | | Span Temp Coefficient | 0.01 % of Rated Load /°C | | Non-linearity | +/- 1.0% of Rated Load typical | | Non-repeatability | +/- 0.04% of Rated Load | | Proof Load | 150% of Rated Load | | Ultimate Breaking Load | >300% of Rated Load | | Protection | IP67 | | Cable | 4-core Screened |
The lengths (L) listed over are standard sizes, any variation of length can be supplied to order.
The diameters (D) listed over are standard sizes, alternative diameters can be supplied to suit the application.
Pins can be supplied with special clamping arrangements, with central barrel sections and of other materials such as Titanium.
All pins are proof tested to 150% of rated load.
See extensive range of Amplifiers and Displays to complete your installation.
|
|
Email this page to a friend
|
