| Analogue Display |
| Friday, 01 July 2005 |
The LOADSENSE CDA-308 Display is a 3.5 digit, analogue bulkhead mounted LCD display module. The basic unit is a DC voltage meter that has been designed specifically for load cell readout applications and to work with the LA2 Analogue Amplifier. The unit is housed in a fully sealed ABS plastic moulded case and waterproofed to IP67 making it ideal for Marine and harsh environments.
Another feature of this display is the automatic back lighting in low ambient light conditions.
| Display span | +/- 1,999 counts | | Read rate | 3 per second | | LED digit size | 0.8 (20mm) | | Decimal point | Factory preset 0 to 3 places | | Input signal | +/- 2V DC | | Resolution | 1:1,999 | | Input resistance | 1 MOhm | | Accuracy | +I- 0.05% of reading | | Input voltage | 5 - 0 - 5V DC | | Consumption | 10mW typical | | Illumination supply | 12V DC | | Consumption | 600mW typical | | Operating temp | -10_C to +50_C | | Cable | 4 metres 6-core screened | | Connections | Signal +ve Green; Signal -ve Black; | | Supply +ve Red;Supply -ve Blue; | | +12V Yellow; 0V (display)White | | Weight | 275 grams |
The unit can be mounted to any convenient bulkhead by means of the four brass M4 x 25 mm studs and nuts provided on the rear of the display.
The front legend is to Customer requirement eg: FORESTAY, RUNNER etc.
| ORDER PART NUMBERING | CDA-308- X | | ZERO Decimal Places | 0 | | ONE Decimal Place | 1 | | TWO Decimal Places | 2 | | THREE Decimal Places | 3 |
|
|
Email this page to a friend
|
