| Analogue Display/ Amplifier |
| Saturday, 02 July 2005 |
The LOADSENSE CDZ-308 Display is a 3.5 digit, analogue bulkhead mounted LCD display and amplifier module. It offers the user an economic solution where a single readout is required. The unit is suitable for connection to any type of transducer with a strain gauge output.
The unit is housed in a fully sealed ABS plastic moulded case and waterproofed to IP67 making it ideal for Marine and harsh environments.
Another feature of this display is the automatic back lighting in low ambient light conditions.
| Bridge excitation | 5V DC | | Bridge resistance | 120 - 1000 Ohms | | Span range | 0.5 - 13mV/V @ 1000 on Display | | Resolution | 1 :1,999 | | Zero | +/- 10% of full range | | Calibration | User select resistor - switch operated | | Display range | +/- 1,999counts | | Read rate | 3 per second | | LCD digit size | 0.8 (20mm) | | Decimal point | Factory preset 0 to 3 places | | Accuracy | +/- 0.05% of reading | | Input voltage | 12V DC | | Consumption | 660mW typical, (excluding Bridge Loading) | | Operating temperature | -10°C to +50°C | | Cable | 4 metres 6-core screened | | Weight | 275 grams |
The unit can be mounted to any convenient bulkhead by means of the four brass M4 x 25 mm studs and nuts provided on the rear of the display.
The front legend is to Customer requirement eg: FORESTAY, RUNNER etc.
| ORDER PART NUMBERING | CDA-308- X | | ZERO Decimal Places | 0 | | ONE Decimal Place | 1 | | TWO Decimal Places | 2 | | THREE Decimal Places | 3 |
|
|
Email this page to a friend
|
